Camera and Image Sensor Calibration

Tunable and Repeatable LED based luminance standard

Camera Calibration

Image Under Control

The consumer electronics sector has been experiencing a boom in the ever-expanding offering of smartphones and tablets. Practically every one of these devices features high-quality cameras and displays. This trend is in turn creating increased challenges for manufacturers of such products who are faced with tough quality control requirements and are expressing a need for reliable test systems to ensure consistently high QA/QC standards. A wide range of testing is required which include setting or validating camera gain and offset, camera gamma and especially white point. In fact, most consumer and professional cameras need their white point verified for more than one type of illumination.

To meet market demand, GL Optic developed a programmable and uniform LED light source, the GL Opti LED 127 for camera calibration applications. This compact uniform calibration reference standard source can simplify tests and measurements for Smartphone OEMs, Camera Module suppliers and end-user electronic systems manufacturers. Thanks to its compact design and easy operation, this solution offers tremendous value for any laboratory application where dependable LED based luminance reference is required.

Integrated and Flexible

This camera calibration luminance reference standard uses a set of discreet LEDs mounted in a small integrating sphere with the electronic control board all contained within a small tabletop box. A standards USB interface is available for PC based software or control the unit via a DLL for automated industrial applications or production line testing. Mechanical mounts can easily be adapted to operate in industrial or laboratory environment.

Faster Component Evaluation

This single LED based calibration source replaces many different sources previously used for sensors and camera component tests and calibration, optimising production test steps and saving time. The sequence of settings can be controlled from the software and different luminance levels or color temperatures are immediately emitted by this instrument.

Reliable LED Standard

As LEDs become more popular the requirement for LED light simulation is increasing. LED based luminance standards are required as a reference source for calibration and research application. In developing the Opti Light, we put major emphasis on light emission stability by using active control of LED performance under different temperatures. All this in a very wide color gamut and high dynamic range.

Camera Calibration

Who is this solution for?

  • Manufacturers of products with all kinds of cameras
  • Manufacturers of digital devices using cameras in their systems
  • Scientists who are researching, evaluating, testing and improving technologies

What Can You Calibrate?

Color Reproduction

In order to configure a sensors color matrix to follow the requirements of color accuracy, this device can replace traditional color samples plus provides an ability to adjust settings of color so that it responds properly to different light levels and conditions and eventually keep color reproduction accuracy.

Signal to Noise Ratio (SNR)

Signal to noise ratio is one of the key performance characteristics of sensors and it may have impact on sharpness, color and other portions of the image pipeline. This is why SNR is commonly monitored when tuning the sensor.

Lens Shading Correction

Non uniform light intensity across the image cause by the camera optical geometry results in a shadowing effect. This uniform light source helps to evaluate and correct this effect.

Other Important Calibration Metrics

  • White balance
  • Defects
  • Linearity
  • Dynamic Range
  • Responsivity
  • ISO Speed
Camera Lense calibration

Build Your Own Set

The products below can be setup for specific application needs

Color Calibration


GL Opti Light LED 127 CLC features a precise current control system combined with Closed Loop Calibration which ensures stable light emission without a single ripple – no flicker, and:

  • delivers very high uniformity ~ 1%
  • has near perfect replication of light sources like D50, D65, D75, A, and TL84
  • offers free selection of light spectra out of a color range bigger than sRGB
  • provides stable conditions through a unique calibration method
  • guarantees a very long LED lifetime due to active thermal stability
  • is easy to set thanks to an intuitive LED control panel

GL Opti Light Control Professional Software


GL Opti Light Control Professional lets you control and program the GL Opti Light LED and set your own light programs, plus:

  • allows light coordinates to be preset according to the user’s needs
  • speeds up work and makes it more pleasant and effective
  • SDK available on demand for easy system integration